Ceramic laggings.

Pulley Lagging.

Pulley Lagging

You are here: NILOS Products Industrial Rubber Pulley Lagging

Ceramic Pulley Lagging Type RB-K

Ceramic laggings with maximum performance for drive drums

Maximum plant availability, productivity and operational reliability and safety and smooth workfl ows during the whole conveying cycle. Reliability for the highest demands.

Special new NILOS AL₂O₃ ceramic profile for beltpreserving operation with significantly increased traction
Pulley lagging with more than 40% or 100% coverage by ceramic material, for conditions of use involving high exposure to wear
Wide operating temperature range (-40° C to +120 °C)
Thermal, mechanical and chemical resistance
Belt preserving elastic rubber substructure with adhesive layer High wear resistance
Outstanding self-cleaning effect
Reliable operation even in the case of wet, clayey and muddy conveying conditions
Simple gluing by means of NILOS contact layer
During processing reduction of the cut waster to a minimum as it can be cut horizontally and vertically
Simple covering of pulleys also in installed state

Downloads

Pulley lagging RB-K made of rubber/ceramic for drive pulleys *

elastic rubber base to reduce belt wear, with adhesive layer
superior drive traction allows lower belt tension
high wear-resistant
very good self-cleaning effect
easy bonding with TOPGUM

Thickness	Width	Length	Item no.
12 mm	204 mm	700 mm	T 1807
		900 mm	T 1808
		1.000 mm	T 1809
		1.100 mm	T 1810
		1.200 mm	T 1811
		1.300 mm	T 1812
		1.500 mm	T 1813
		1.700 mm	T 1814
		2.000 mm	T 1815
		2.500 mm	T 1816

Pulley lagging RBK-RN made of rubber/ceramic for drive pulleys

NILOS AL₂O₃-ceramic material: triangular approx. 1 mm studded, 4 mm thick. Rubber support: 60 ± 5 Sh° A with bonding layer

Medium to severe operating conditions
for medium to large drive rollers with fabric belts
Excellent traction (coefficient of friction) permits low belt tensions
high wear-resistant
very good self-cleaning effect
easy bonding with TOPGUM

Thickness	Width	Length	Item no.
12 mm	410 mm	6.500 mm	X 2801012

Streifen-Trommelbelag RBK-R70 aus Gummi/Keramik für Antriebstrommeln *

NILOS AL₂O₃-ceramic: with dimensions 10 x 20 x 30 mm Stone with rounded corners and profi ling from 2 mm high, blunt topped square pyramids. Rubber support: 70 ± 5 Sh° A with contact layer.

Medium to heavy conditions
for medium to large drive pulleys with fabric belts
Excellent traction (coefficient of friction) permits low belt tensions
high wear-resistant
very good self-cleaning effect
easy bonding with TOPGUM

Thickness	Width	Length	Item no.
15 mm	385 mm	1.130 mm	T1889

Also available as rubber/rubber lagging.

“Solid” ceramic lagging type RB-CP for drive pulleys

NILOS AL₂O₃-ceramic: with dimensions 10 x 20 x 30 mm Stone with rounded corners and profi ling from 2 mm high, blunt topped square pyramids (packaged on supports).