Cord Stripper System

The Cord Stripper is an indispensable accessory to strip and separate the steel cables of conveyor belts.

 

To use the cable stripper system for the first time, you need the following components:

  • cord stripper
  • min. 50 x blades (top) for cord stripper
  • min. 50 x blades (bottom) for cord stripper
  • power winch CS
  • slide rail for capacity winch CS

An application film can be found here.

Cord Stripper

Technical DetailsItem no.
belt width up to 43 mm
Ø cable 3,7 - 12,6 mm
cord width 10 - 25 mm
cover plate thickness running side till 25 mm
cover plate thickness carrying side till 12 mm
dimension (L x H x W) 375 x 215 x 405 mm
weight 12 kg
1 blade holder set type A + pressure roller
1 blade holder set type B + pressure roller
1 tool set
K 1200
1 blade holder set type A + pressure rollerK 1210
1 blade holder set type B + pressure rollerK 1220
1 tool setK 1230

Blades for Cord Stripper

The minimum order quantity of each blade is 50 pieces (O = top and U = bottom). Blades are not part of the delivery of the cord stripper and must be ordered separately.

Blade no.Blade holderØ CableItem no.
4,5A3,7 - 4,1 mmK 1045-O /-U
54,2 - 4,6 mmK 1050-O /-U
5,54,7 - 5,1 mmK 1055-O /-U
65,2 - 5,6 mmK 1060-O /-U
6,55,7 - 6,1 mmK 1065-O /-U
76,2 - 6,6 mmK 1070-O /-U
7,56,7 - 7,1 mmK 1075-O /-U
87,2 - 7,6 mmK 1080-O /-U
8,57,7 - 8,1 mmK 1085-O /-U
98,2 - 8,6 mmK 1090-O /-U
9,58,7 - 9,1 mmK 1095-O /-U
10B9,2 - 9,6 mmK 1100-O /-U
10,59,7 - 10,1 mmK 1105-O /-U
1110,2 - 10,6 mmK 1110-O /-U
11,510,7 - 11,1 mmK 1115-O /-U
1211,2 - 11,6 mmK 1120-O /-U
12,511,7 - 12,1 mmK 1125-O /-U
1312,2 - 12,6 mmK 1130-O /-U

Power Winch CS

The capacity winch CS is an indispensable part of the cord stripper system. It is specially designed for continuous use and is especially characterized by high tensile speed, the torque and the nearground cable conduit. In addition, the signal colour contributes to work place safety. The safe operation of the supply and return takes place via the control panel (4 m long) with emergency stop switch.

The electronic phase control ensures that the operation of supply and return is always consistent.

Technical DetailsItem no.

steel rope length 6 m
remote control 4 m
power 2,20 kW, 400 V, 50/60 Hz, 3 Ph + PE*
dimension (L x H x W) 620 x 500 x 650 mm
protection IP 54
weight approx. 70 kg
tensile speed: approx. 34 m/min
overload protection

on request
rope made of steel 10 mK 1310

* Other voltages on request

Slide rail for Power Winch CS

The slide rail is fixed transversely to the conveyor belt and is used to safely accommodate the capacity winch CS. By gently moving the capacity winch within the guide rail, the optimum position for the pulling direction is assured.

Technical DetailsItem no.

length 3,5 m
with fixing points for belt width up to 3.000 mm
dimension (L x W x H) 3.500 x 380 x 70 mm
weight 60 kg

K 1316